Controlling the shaft before and during operation

1. Shaft is not used without protective equipment and shaft is operated only after the damaged protective equipment is repaired. If it is unrepairable, the shaft cover is renewedbefore operation.
2. Make sure that the safety locks which are in the forks of the tractor and agricultural machine are firmly attached to the tractor and agricultural machine. Shaft is never operated without being controlled first.
3. Protective chains are fixed after being attached to the tractor and agricultural machine. Whether the cover of the shaft rotates is controlled. The shaft cover is not to rotate while in operation. If the cover rotates together with the shaft, then it is understood that connection is not made thoroughly and it must be re-controlled and the cover must be fixed.
4. The shaft is never operated in sharp turns and with an angle above 25° in 540 speed.
5. Make sure that the rotation is smooth while the shaft is working. In case of a fault in the brake lining while the shaft is operating, the tractor is stopped, and the safety points attached to the tractor and agricultural machine (locking pins, bolt and gamma safety) and the shaft pipe are controlled.